Voltar as marcas
Partilhar

IMPACT TEST

Descrição

The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessories) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14 Mandatory test in Qualicoat, QIB and GSB accredited laboratories. STANDARDS FOR IMPACT TESTING Below mentioned standards are a list of the possible standards. If the required standard is not listed below please contact TQC to check if adoption of this standard is possible*:

  Type of Impact

SP1880

Indirect

SP1890

Direct

SP1891

Direct

SP1895

Direct

SP1896

Direct

ISO 6272-1:2002

 

 

 

 

ISO 6272-2:2002

 

 

 

 

ISO 6272:1993

 

 

 

 

ASTM D 2794:2004

 

 

 

 

ASTM G14-04

 

 

 

 

JIS K 5600-5-3:1989

 

 

 

EN 12206-1:2004

 

 

EN 13523-5:2001

 

 

 

AAMA 2605-05

 

 

 

Qualicoat 2006

 

 

 

Qualisteelcoat 2008

 

 

 

Canadian Standards Association (CSA)

 

 

 

 

* Conformation to a required standard depends on the impact tester type. The combination of items can change to comply with another standard. AVAILABLE TO ORDER

  SP1880 TQC Impact Test according to ISO 6272-2 and ASTM D2794 Type: Indirect Impact Tester Content: Base plate assembly, guide tube, release collar, punch Ø12.7 mm , punch Ø15.9 mm, weight 1 kg, die Ø16.3 mm. Max test panel thickness: 4,5 mm
  SP1890 TQC Impact Test according to ISO 6272-1 Type: Direct Impact Tester Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg. Max. test panel thickness: 1,25mm
  SP1891 TQC Impact Test according to ISO 6272-1 and ASTM D2794 (before 1993) Type: Direct Impact Tester Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg, ball Ø15.9 mm, die 16.3mm, weight 0.9 kg
  SP1895 TQC Impact Test according to ASTM G14 Type: Direct Impact Tester Content: Base plate assembly, guide tube, release collar, punch Ø15.9 mm, weight 1.361 kg and a V-notch vise with spring clamp to hold the pipe
  SP1896 TQC Impact Test according to CSA
ACESSORIES
ACCESSORIES FOR IMPACT TESTERS DIN ISO ASTM Accessories for Impact Testers for determining the impact resistivity/flexibility of coatings in accordance with DIN/ISO 6272-1 and ASTM ...

DOWNLOAD Datasheet IMPACT TEST

Produtos